Product Description

The MAF100D-0250-FQ-M2-BH1-05-N1 is an induction motor from Bosch Rexroth Indramat. It is a part of the IndraDyn A motor generation, which consists of the MAD series of air-cooled motors and the MAF series of liquid-cooled motors. Some typical use cases for this motor include in metal-forming machinery, packaging machines, and printing presses. The motor has a length of D and a size of 100. It features a multiturn absolute encoder and has a power connector that goes to side B.

The motor is equipped with an integrated electrically released holding brake. The holding brake has a holding torque of 24 Nm, a rated current of 1.1 A, and a moment of inertia of 5.6 x 10-4 kgm2. The holding brake has a mass of 1.6 kilograms, while the motor has a mass 64 kilograms. The brake takes 90 milliseconds to connect and 30 milliseconds to disconnect. The maximum permissible braking energy of the brake is 20000 Ws and it has a connection voltage of 24 +/- 10% volts.

The MAF100D-0250-FQ-M2-BH1-05-N1 is equipped with standard bearings and has a standard vibration severity level. It uses flange mounting installation and features a plain shaft without a shaft sealing ring. The rated speed of the unit is 2500 revolutions per minute while the maxim speed with bearing is 9000 rpm. It has a key speed rating of 2000 rpm. The recommended ambient temperature range for optimal performance is 0 to 40 degrees Celsius. It has a motor protection class rating of IP65, and thus, can be used in conditions where it might be exposed to dust, coolants, and oils. It has an insulation classification of F according to the DIN EN 60043-1 requirements.