Product Description
The MAF100C-0250-FQ-M0-AG5-05-R1 is an advanced induction motor from the MAF series. It is designed and crafted by the reputable Rexroth Indramat. It has a 100 motor frame size and a C type motor frame length. This motor operates at a rated speed of 2500 RPM, as indicated by its 0250 winding code. With a torque constant of 1.55 Nm/A at 20°C, this motor type is designed to deliver consistent and powerful torque. This motor unit supports a cycle duration of 5 minutes under S6 - 44% duty, making it well-suited for applications requiring intermittent operation.
Also, the MAF100C-0250-FQ-M0-AG5-05-R1 features a discharge capacity of 9.4 nF and contains a three pole pairs. The unique motor type also has a power wire cross-section of 10.0 mm², enabling it to handle substantial electrical currents with minimal resistance and heat buildup. However, care is imperative when operating this unit due to the risk of burns from hot surfaces, including heat sinks, braking resistors, supply units, motor windings, drive controllers, and laminated cores.
Surface temperatures in this motor can reach up to 60°C during or after the operation, and adequate cooling time is essential to ensure safety. Cooling down these components can take up to 140 minutes, approximately five times the thermal time constant of 3.5 minutes, to prevent injury. Users are advised to avoid contact with these hot surfaces until the motor has cooled sufficiently after shutdown. This high-performance motor combines efficiency, durability, and safety, making it a reliable choice for a range of industrial applications. With these features, the MAF100C-0250-FQ-M0-AG5-05-R1 stands out as a robust and efficient solution. It is a reflection of the quality and precision provided by Rexroth Indramat. A one-year warranty is included in this product.
Wake Industrial Warranty
