Product Description
The MAF100C-0250-FQ-C0-EG0-35-N4 is a servo motor that is manufactured by Rexroth Bosch. The MAF100C-0250 servo motor is designed to deliver a rated torque of 62.0 Nm. This is the amount of torque the motor can continuously produce at its rated speed of 2500 min^-1 while maintaining a safe operating temperature. To achieve this torque and speed, the motor draws a rated current of 40.2 A. This signifies the amount of electrical current required to power the motor under these rated conditions. The motor's key speed is 2000 min^-1. This is the speed at which the motor's torque may start to decrease. While the motor can operate beyond this speed, it might not be able to maintain its full rated torque.
This decrease in torque is known as derating and is a characteristic of certain motor winding versions. This servo motor can briefly reach a maximum torque of 138.1 Nm and a maximum power output of 33.27 kW. This peak performance is achieved with a maximum current of 85.8 A. In continuous operation at a standstill, the motor delivers a torque of 62.0 Nm and draws a current of 38.5 A. It's important to note that these maximum values are for short durations to prevent damage to the motor windings.
The MAF100C-0250-FQ-C0-EG0-35-N4 servo motor has a thermal time constant of 3.5 minutes, which means it takes 3.5 minutes for the motor to reach 63% of its final temperature under a rated load. The discharge capacity of 9.2 nF refers to the capacitance of the motor's power connections relative to the motor housing. The motor has three pole pairs, which determines the number of magnetic poles in the motor and influences its speed and torque characteristics. The motor weighs 52.0 kg. We offer a one-year warranty when you purchase this device.
Wake Industrial Warranty
