Product Description

Designed for high-performance industrial uses, the MAF100B-0250-FR-S2-BH0-35-N1 servo motor offers stable and strong operation. Operating with a rated current around 16.2 A & a rated speed that is 2,500 1/min, it offers a stated torque of 25.0 Nm & a rated power capacity of 6.50 kW, with a critical velocity of 2,000 1/min. MAF motors, like the MAF100B-0250-FR-S2-BH0-35-N1, have to be operated with an externally connected cooling system. The coolant spreads the power loss of the motorwhich is turned into heat. Thus, these motors have to be utilized just as long as the coolant supply is assured. Designing the cooling system to satisfy all flow, pressure, cleanliness, temp gradient, and other criteria under any condition of operation rests on the machine manufacturer.

The technical information provided for the cooling system identifies water as the coolant. Should distinct coolants be used, this information becomes useless & has to be redetermined. Running water from the public supply network is not allowed for cooling as hard water could result in precipitations or corrosion, therefore endangering the motor and the cooling system. The water used for cooling has to meet certain standards and be handled properly, if required. For further information, kindly refer to the coolant additive supplier.

Mixing with the cooling water guarantees corrosion prevention & chemical stabilization through the use of an appropriate addition fit for mixed systems with elements listed in the provided user-manual. Should the coolants, additives, or cooling lubricants used be excessively harsh, the motors might be permanently harmed. Maintaining the performance, dependability, & dependability of the motor in numerous distinct industrial situations depends on following these requirements. The safe and efficient functioning of the motor depends critically on the design and maintenance of the cooling system.