Product Description
Designed for high-performance applications the MAF100B-0250-FQ-S2-BH0-05-H4 servo motor has a peak torque of 25.0 Nm and an estimated power rating of 6.50 kW. Operating with a key speed of 2,000 1/min and an authorized current of 16.2 A and a maximum speed of 2,500 1/min, it runs With bearing A, the motor can reach a maximum velocity of 9,000 1/min; with bearing H, 11,000 1/min; with bearing N, 9,000 1/min. Appropriate for numerous demanding industrial operations, the motor has an authorized torque of 61.5 Nm & an aggregate power rating of 13.33 kW.
Including the MAF100B-0250-FQ-S2-BH0-05-H4, IndraDyn A motors meet the IEC 60529 defined degrees of protection. Regardless of their installation setting, it is important to make sure the motors are not exposed to conditions outside beyond their suitable degree of safety. Two code numbers together with the short abbreviation IP (International Protection describe the degree of protection). Whereas the second code number represents the degree of protection against intrusion by water, the first code number indicates the degree of protection against touch and foreign body penetration.
On their flange side, motors with a shaft sealing ring have an IP 65 degree shielding for side A, therefore ensuring tightness against incoming splash fluids. On the output side, nonetheless, fluid levels call for further protection. Grilles in axial fans provide side B some protection of IP 24, allowing chips or big dirt particles to penetrate. Maintaining the factory-made degree of protection of IndraDyn A motors is crucial as replacing the motors or adding accessories will not lower their degree of protection. Following these protective criteria guarantees the effective and safe running of the motor in various industrial surroundings.
Wake Industrial Warranty
