Product Description
The MAD225C-0100-SA-S2-KP0-35-V1 asynchronous housing motor delivered by Bosch Rexroth is meant to be operated within the specified ambient conditions. This motor must be used with a commissioned drive controller to perform the application-specific functions. The product has a three-phase design. This device should at no time be operated without its fan. This device must be installed only in industrial machinery. The unit has a surface temperature of more than 60 °C during and immediately after use. It can be installed in either a horizontal or a vertical orientation.
This motor must be handled using appropriate lifting equipment. The product should be operated only by personnel with the expertise to do so. This device has a maximum torque based on the drive controller used. The unit has a continuous torque at a standstill for S1 operating mode before its key speed is reached. Its fan is connected to the supply network through a protective switch and a cable. This motor can withstand an axial shock load of 10 m/s² up to 6 minutes. The product is equipped with a shaft sealing ring. This device can be installed only in the horizontal position. The unit can be painted with an extra layer of paint of a maximum of 40 µm thickness. It is cooled through air currents. This motor is prone to damage because of improper cleaning agents. The product features a pre-warning temperature of 110 °C. This device has an output shaft with a keyway. The unit supports a circumferential radial force of 120 N. Its availability is largely determined by the bearing lifetime. This asynchronous housing motor encompasses reinforced bearings.
Wake Industrial Warranty
