Product Description
The MAD180D-0150-SA-C0-KP0-35-A1 is a variant of an asynchronous motor with an incremental encoder. This motor has the incremental encoder sine-/cosine signals 1Vss with 2048 lines per revolution. Due to different encoder technologies, the motor encoders can be connected to only certain drive controllers and interfaces. This variant of the motor encoder is compatible with ECO03 DKC 40…2000, DIAX04 HDD & HDS, Advanced IndraDrive, and Basic universal IndraDrive. This encoder is not compatible with other basic variants of IndraDrive.
The MAD180D-0150-SA-C0-KP0-35-A1 has a rated speed of 1500 rpm with a key speed of 1000 rpm. The weight of the machine is 403 kg, and this variant doesn’t have any holding brakes. The cooling method used in the motor is an axial fan blowing with the air current direction from B to A. The power consumption of the axial fan varies between 242 to 382 VA. The medium air flow is 1500 cmh whereas the fan current varies from 0.35 A to 0.46 A.
The MAD180D-0150-SA-C0-KP0-35-A1 has F grade insulation according to DIN EN 60034-1. The protection grade of the motor is IP 65, and the moment of inertia of the motor is 0.594. The power wire cross-section area is 35 mm2. The number of pole pairs is 3, and the duty cycle of this motor at s6-44% is 10 minutes. The capacity of short-circuited power connections U, V, and W against the motor housing is 38 nF. It has 2 PTC temperature sensors KTY84-130, and the permitted transport temperature range is from -20°C to +80°C. The electrical connection is at side B and they are only available at the top. It has a driven shaft with a sealing ring and is balanced with the entire key.
Wake Industrial Warranty
