Product Description
The MAD180C-0200-SA-S2-HL0-35-V1 is a highly advanced high-speed MAD series AC servo motor manufactured by Bosch Rexroth for industrial automation applications. This motor uses 66.6 kilowatts of power, and it runs on 154 amperes. It's capable of delivering a steady torque of 318 Nm while cruising along at 2000 rpm. It has got a torque constant of 2.39 Nm/A when running at the temperature of 20 degrees Celsius. To power it up properly, it needs two cables with a cross-section of at least 25 square millimeters each. The rotor's quite sturdy, with a moment of inertia of 0.49 kgm². When it comes to heating up, it takes about 20 minutes to reach its peak temperature. The working temperature recommended by the manufacturer is 0 to 40 degrees Celsius whereas the storage temperature is -20 to +80 degrees Celsius.
This motor uses liquid cooling to lower its internal temperature for better performance. It dissipates a power of 4.5 KW. The cooling agent needs to have a temperature of +10 to +40 degrees Celsius. The coolant is required to flow at the rate of 6.6 lit/min. The maximum pressure at which the coolant can flow in the systems is 3 bars. This motor uses a reinforced type of bearing and its vibration intensity is of level R.
The motor has an absolute value single-turn encoder. It provides 2048 increments on a single rotation. The encoder is used to control the motor rotational angle and its velocity. The motor has a mass of 312kg. The motor has a half keyway in the shaft without any sealing ring. Its mounting size is 180 and it can be mounted through the flange and its footing.
Wake Industrial Warranty
