Product Description
The MAD180C-0150-SA-S2-HQ0-35-N1 asynchronous motor produced by Bosch Rexroth has a C length code. This motor makes use of a solidly connected fan for its cooling action. The product requires minimum maintenance because of its easy-to-service design. This device should be used only after reading and understanding details regarding the intended use and safety. The unit uses different metals for designing its components. Its connected drive controller is intended to be programmed before its startup. This motor-associated electrical installation should be assigned to only qualified and trained people. The product might cause a risk of injury because of cutting and hitting.
This device operation is not possible even for a brief period without establishing a grounding connection. The unit has a 42.4kW nominal power rating. It is meant to be operated only in commercial machinery. This motor operation is not to be initiated when the emergency stop switch of the associated machine is not working. The product portrays reduced output when the operation occurs between 40 °C and 55 °C. This device features low relative air humidity of 5%. The unit supports maximum admissible axial shock stress of 10 m/s2 for 11 ms. This asynchronous motor shipping is done through a trustworthy logistics team.
The motor comprises complete contact protection. Its shaft is balanced with the entire key and does not have any shaft sealing ring. This product should at no time be subject to ambient conditions outside the specified applicable protection in compliance with IEC 60529 specifications. This device tends to get damaged due to the intrusion of liquid or liquid accumulation around the shaft. The unit fixing action can be accomplished by either foot assembly or flange assembly. It can encounter radial forces only in the vertical direction on the assembly surface. This motor housing paint is completely resistant to diluted acids as well as alkaline solutions. This asynchronous motor depicts one-year backup support.