Product Description
The MAD180C-0150-SA-S2-HL0-35-V1 servo motor is manufactured by Bosch Rexroth. Continuous operation at a rated speed of 1500 rpm is intended for the MAD180C-0150 servo motor. It produces 42.4 kW of mechanical power in this mode, with a constant torque of 300 Nm. 88.6 A of rated current is required for this operating condition. But these rated numbers are not the limit of the motor's capability. Although not constantly, it is capable of producing a peak torque of 681 Nm. The motor's key speed, which is 1000 rpm, is the lowest speed at which this peak torque is attained. Once the motor reaches this critical speed, servo motors often exhibit a drop in torque production as the speed increases.
86.9 kW is the maximum power output (Pmax) that the MAD180C-0150 servo motor can produce, depending on the driving controller and power source. The motor's maximal mechanical power is expressed in this measure. The motor can produce a stationary torque (Mn1) of 300 Nm when running continuously. When the motor is not moving, it may generate this amount of torque. This fixed torque is provided by the motor with a constant current (In1) of 116.2 A. This quantity of current is drawn by the engine when it is operating constantly at a stop. The highest current that the motor can have for a short period of time (Imax) without breaking down is 230.3 A.
Moreover, a maximum speed (nmax) of 6000 rpm is allowed by the reinforced bearing. Bearing strain and centrifugal forces are the mechanical factors that result in this limit. This servo motor's duty cycle time (TC), or the amount of time it takes to attain a thermally stable state, is 10 minutes when operating in periodic intermittent mode (S6). In addition, the motor has two pole pairs (p) and a discharge capacity (Cab) of 30 nF, which is the capacitance of its power connections to the housing. We offer a one-year warranty.
Wake Industrial Warranty
