Product Description
The MAD180C-0150-SA-M2-DP0-35-N1 is a motor with the functionality to deliver feedback to its current state and its rotational velocity. The maker of this motor uses an international standard IEC 60034-1 to measure its different parameters. This motor has a maximum speed of 658 revolutions per minute (rpm). The motor's internal windings are built in such a way that it has 2 numbers of pairs of poles. These poles generate so much power that the rotor of this motor has a mass moment of inertia of 0.458 kgm2. The maximum mass of the motor is 334 Kg. This mass is without of the holding brake but it does include the axial blower weight.
This motor comes with a standard type of bearings installed in it. This standard bearing can achieve a maximum speed of 6000 rpm, which if compared to the maximum speed mentioned above, of the motor is quite large. This difference shows that the bearing can last over an extended period of usage. This product has a very high thermal time constant which indicates that its windings are well protected against the high surge of temperatures. The thermal time constant for this motor is 60 minutes.
The permissible storage temperature for this motor is -20 to +80 degrees centigrade. The transport temperature of the motor is also the same as the storage temperature. To protect the motor’s body against unwanted electrical shocks, it follows an international standard of DIN VDE 0530-1. According to this standard, its insulation class is F. Its body is built in such a way that it ensures a high class of international protection which is IP 65.
Wake Industrial Warranty
