Product Description
The MAD180C-0150-SA-M2-DH0-35-N1 belongs to one of the most massive motor families under Rexroth’s MAD motor series. The MAD motor series usually incorporates large axial blower fans to facilitate surface cooling. Housing a robust set of capabilities, the MAD180C-0150-SA-M2-DH0-35-N1 provides a rated power and current of 42.3 kW and 88.6 A, respectively. Whenever this motor delivers rated power, the motor’s shaft runs at approximately 1500 revolutions per minute to deliver a torque of 270 Nm. With these capabilities, the MAD180C-0150-SA-M2-DH0-35-N1 has become a common choice for applications requiring high values for both power and torque.
Aside from the rated parameters, the stall parameters are also crucial to consider. The stall or standstill parameters can be obtained by performing a locked-rotor test. During this test, the rotor is fixed in a constant position to simulate starting motor operation. This test is essential for designing the motor protection system. This protection system prevents overcurrent, overheating, etc. Based on Rexroth’s MAD project planning manual, the MAD180C-0150-SA-M2-DH0-35-N1 reaches a stall torque of 300 Nm and a standstill current of 91 A. Comparing the rated values of the stall parameters, the latter is slightly higher. During the starting period, the back emf is approximately zero, which results in a higher current draw.
The MAD180C-0150-SA-M2-DH0-35-N1 integrates a multiturn absolute encoder that initiates its function using 2048 increments. The absolute encoder works seamlessly with Indramat’s drives and controllers. Other features of this motor model include a power connector on the right side, a standard bearing, and a plain output shaft without a sealing ring. Finally, this motor model employs no blocking or holding brakes. To get an exclusive one-year warranty, along with a quick quotation for the MAD180C-0150-SA-M2-DH0-35-N1, contact Wake Industrial now.
Wake Industrial Warranty
