MAD160C-0200-SA-S2-BQ0-35-N1

Product Description

The MAD160C-0200-SA-S2-BQ0-35-N1 asynchronous housing motor supplied by Bosch Rexroth uses a single-turn absolute encoder for feedback. This motor must always be retained in its original state. The product deploys surface ventilation cooling mode. This device should be put into use only by people familiar with its intended use. The unit is considered to be put to inappropriate use if it is operated outside the specified technical data. Its connectors should not be connected or disconnected under load.

This motor must not be operated when there is an extreme temperature fluctuation. The product can be installed outside a control cabinet. This device is supposed to be handled using lifting equipment that can withstand its weight. The unit depicts a Class 2K11 transportation class in accordance with DIN EN 60721-3-2 specifications. It must be stored in a dry and dust-free location. This motor must be free of load during the transportation and storage processes. The product should be run without load between 800 rpm and 1000 rpm speed if the storage period is between one and five years. This device encompasses 12 mounting holes into which M10 type screws with a tightening torque of 48 Nm can be fitted. The unit must be mounted only after ensuring that all system tolerances and dimensions are suitable for doing so. Its protective sleeves must be removed at the time of assembly.

This motor must not be fitted with transmission elements on the output shaft. The product has no additional grounding connections. This device must not be commissioned if the safety mechanism of the machine is not in working condition. The unit should be shut down after decelerating the drive to a standstill mode using machine-side control commands. Its fan has several screwed elements. This asynchronous housing motor may cause injury if contact is made with its rotor.