Product Description
MAD160C-0200-SA-C0-EH0-35-N1 is one of the asynchronous motors manufactured by Rexroth Bosch who is one of the leading manufacturers in the electrical goods industry.
Being an asynchronous motor, it doesn’t require any external effort to start. The size of this motor is 160 and the winding is 0200. The length is C and the cooling system consists of axial fans that blow out all the heat the engine produces. It has an incremental encoder with 2048 increments and the shaft is plain with no sealing ring. MAD160C has no holding brakes and can be attached to any surface by a flange or foot mounting. It has a standard bearing and the mass value without holding brake and with fan is 238 kg.
The maximum torque this motor can produce without overheating or damaging itself is termed rated torque and its value is 210 Nm whereas the highest rotational force this motor produces under specific conditions is termed maximum torque and it is 494 Nm. The rated power is 44 kW and it can give the maximum output of 90.2 kW. The rated current consumption of MAD160C is 93.9 A and the maximum current consumption can reach up to 182.4 A. The rated speed of this motor is 2000 revolutions per minute and the key speed is 1500 revolutions per minute but with bearings, the maximum speed can reach up to 6000 revolutions per minute. At a standstill state, the continuous torque value is 225 Nm whereas the current consumption at a standstill state is 93.9 A. The torque constant at 20 ℃ is 2.63 Nm/A and the thermal time constant is 70 minutes. The duty cycle time of this motor is 10 minutes and the ambient temperature in operation ranges somewhere between 0 ℃ to 40 ℃.
Wake Industrial Warranty
