MAD160C-0150-SA-M2-HG0-05-N1

Product Description

The MAD160C-0150-SA-M2-HG0-05-N1 is a servo motor manufactured by Rexroth Bosch. The continuous torque (Mn1) is the twisting force that this device can apply continuously without moving, it is 224 Nm. The value of continuous current is 77.8 A at standstill, the motor uses this much current when applying force without moving. The value of the torque constant is 3.36 Nm/A, which shows us the twisting force produced for each unit current used. The motor produces 3.36 Nm of torque per ampere of current. The thermal time constant (Tth) of this module is equal to 70 minutes. It tells you how quickly it gets hot. This is the time required to reach up to 63.2% of the final temperature when running.

The duty cycle time (TC) of this device is 10 minutes. The rated torque (MN) of this device is 215 Nm which is its strength. This module can exert a force of 215 N at a distance of 1 meter from the center of the rotating shaft. The Rated Power (PN) is equal to 33.8 kilowatts. The rated current (IN) of this motor is 75.3 A. This device uses 75.3 A of electrical current when working at the normal strength.

The rated speed (nN) of this device is equal to 1500 rpm at which it spins when working normally. It means the motor's shaft completes 1500 full rotations each minute. The key speed (n1) of this device is 1000 rpm, where the motor’s power starts to change. The maximum torque (Mmax) is 496 Nm at peak current, it marks the strongest the motor can get for a short period. We offer a one-year warranty on this servo motor after purchase.