MAD160C-0150-SA-M2-AG0-35-N1

Product Description

When the motor is powered ON the continuous torque at standstill is 225 Nm and the continuous current at standstill is 77.8 A. The torque constant at 20 degree Celsius is 3.36 Nm/A. The thermal time constant is 70 min. The duty cycle time for this motor defines the recommended maximum time for a cycle i.e. 10 mins. The discharge capacity is 27.2 nF. The no. of pole pairs is 3. The power wire cross section is 25 mm^2.

When in transport it must be ensured that the motor's max. shock load is not exceeded, for the MAD160C-0150-SA-M2-AG0-35-N1 the max. permissible axial shock load is 10 m/s^2 & the < is 150 m/s^2. The permitted radial force with the standard bearing 'N' is 65 N but can be revamped up-to 1300 N if reinforced bearings are used. The mechanical service life of bearings is 30,000 operating hours. The motor is capable to be attached to various drive elements such as pinions, couplings, gearboxes.

These motors are completely tested before delivery and may be used only as per areas approved by the manufacturer, any unintended use may result in damage to property or personal. These state-of-the-art motors specialize in versatility, covering a broad spectrum of industry needs such as machine tools, metal forming machinery and even printing or packaging machines. All this is possible because of the broad speed ranges, accurate positioning and the multi turn absolute encoder with 2048 increments installed in the same. Bosch is the manufacturer of the MAD160C-0150-SA-M2-AG0-35-N1 and it comes with a one year warranty period.