Product Description
The MAD160C-0100-SA-S2-RP0-35-A1 is an induction motor with a 1000 rpm rated speed at a rated power of 23.56 kW. The derating speed is 500 revolutions per minute, and this machine is integrated with a fixed bearing at side A. The bearings are the limitations of the maximum speed so that the machine can achieve 6,000 rpm. The Ambient air temperature during operation is 0 C to 40 C, and the manufacturer advises transporting the motor in its original packaging to protect the motor against dirt, dust, etc. The power cross-section area of this variant of the motor is 10.0 mm2. The number of pole pairs in the motor is 2.
The MAD160C-0100-SA-S2-RP0-35-A1 have the maximum power, current, and torque of 90.2 kW, and 182.4 A, and 494.2 Nm. The maximum power is the maximum output power of the motor at 540 VDC, and the reachable maximum power depends on the drive controller used and?on the supply voltage. The maximum current is the maximum?allowed phase current of the motor without damaging winding.
The admissible ambient air temperatures range from 0C to +40C and installation altitudes range from 0 m to 1000 m above sea level. In the installation phase, it is recommended to lift the motor using eye bolts provided at the motor. The continuous current and?torque at a standstill are 55.7A and 240 Nm. One of the important factors in an asynchronous motor is discharge capacity as it is the capacity of short-circuited power connections U, V, W against the motor housing. The discharge capacity of the component of MAD160C-0100-SA-S2-RP0-35-A1 is 25.7 nF, and the moment of inertia of the rotor without bearing, brake, and motor encoder is 0.311 kgm2.
Wake Industrial Warranty
