Product Description
The MAD160C-0100-SA-M2-BP0-05-V1 asynchronous housing motor supplied by Bosch Rexroth is operated with the manufacturer's drive controller. This motor encompasses a squirrel-cage rotor. The product is noted for its high continuous performance. This device is meant to be used only as intended by the manufacturer. The unit is one of the various motors in the MAD series. It uses a fan to implement its cooling action. This motor can perform the application-specific function only if the drive controller is commissioned before startup.
The product can be installed in horizontal and vertical orientations. This device comes with protective sleeves on its connectors and output shaft. The unit causes dangerous movements of the drive controller due to faulty control. It is delivered without a holding brake. This motor has a very hot surface during and immediately after its use. The product is not supposed to be lifted by holding on to its output shaft. This device supports S1 and S6 operating modes. The unit has a constant torque up to the rated speed without a derating effect. It cannot be used in potentially explosive areas.
This motor encompasses two KTY84-130 type temperature sensors. The product should never be put into use without its fan. This unit comprises a 10-pin, 12-pin, or 17-pin connector socket on its housing for the encoder connection. This device may need two cables for its power connection if it is not possible to use a single cable because of the large bending radius. The unit comes with a rating plate attached to its housing. Its power connector has a maximum current carrying capacity of 100 A. This asynchronous housing motor has an IP 65 degree of protection.
Wake Industrial Warranty
