Product Description
The MAD160B-0150-SA-S2-AP0-05-A1 is a type of asynchronous servo motor. This product is manufactured by Rexroth Indramat Bosch. We recommend a power cable with a cross-sectional measurement of 16 mm2 for this motor. The rotor has a moment of inertia of 0.24 kg/m2. The motor has a mass of 197 kg. We measured the peak speed with the attached bearing to be 6000 nmax rpm for the standard, 6000 nmax rpm for the reinforcement, and 4200 nmax rpm for the coupling. The rated thermal time value is 60 minutes. The noise class is 75 decibels. Heavy-duty operations should expect a permissible spike of 3 decibels.
The widely recognized DIN VDE 0530-1 standard has designated the insulation class as "F". It features the IP65 International Protection Class. Optional feature: brake for holding orientation. It can deliver a torque of 100 Newton meters. The voltage of the connection is DC 24 ± 10% volts. The rated current for the electrically clamped mode is 1.8 amperes, whereas for the electrically released mode, it is 2.0 amperes.
The electrically released mechanism has an engagement time of 12 ms, whereas the electrically clamped mechanism has an engagement time of 85 ms. The brake comes with a peak speed of 10,000 mph. The brake boasts a mass of 20 units. In regards to the axial blower, the voltage rating for the connection is 3 x 400 V. ± 15%, with a constant frequency rating of 50/60 Hz. It supports a three-phase electrical power supply with a voltage of 480V and a tolerance of ± 10%, operating at a frequency class of 50/60 Hz. The power requirement spans from 132 to 175 VA. The current of the blower is 0.19–0.21 amperes. On average, the airflow rate is 1000 m3/h.
Wake Industrial Warranty
