Product Description
The MAD160B-0150-SA-M2-AP0-05-N1 asynchronous motor manufactured by Bosch Rexroth cannot be installed if it has defective components. This motor has an electrical connector oriented to the A side on its housing. The product encompasses a type plate on its housing. This device features leakage current over its conducting housing parts due to corrosion. The unit has an internal temperature of 120°C at the maximum ambient operating temperature. It is an integral part of the manufacturer’s drive system. This motor uses a fan as an external cooling system. The product has a supply voltage of 24V +/-10% for the holding brake operation. This device encounters two types of forces on the bearings and shaft when it is in use.
The motor has either a high-speed bearing or a reinforced bearing. This unit has a shaft sealing ring made of PTFE around its shaft. It is balanced using the key that comes along with it. The product does not offer support for altering the position of its encoder connection. This device is designed to operate between 0°C and 40°C. The unit portrays a rated torque of 190Nm. Its holding brake can be used only in standstill mode when performing a drive internal check. This MAD160B-0150-SA-M2-AP0-05-N1 asynchronous motor is dispatched worldwide.
The motor houses an inbuilt temperature sensor for its protection against overheating. This product features the flow of cooling air from the fan through air plates over its surface. The device housing comprises a black epoxy-raising coating. This unit installation is possible both horizontally and vertically as per EN 60034-7 specifications. It comes with IP 65 degree of protection. The motor portrays protection against the intrusion of dust. This product has 10m/s2 maximum admissible axial shock stress for 11ms. The device has lesser than standard output performance when the ambient operating conditions are exceeded. This asynchronous motor features one-year backup support.
Wake Industrial Warranty
