Product Description
The servo motor model number MAD160B-0100-SA-S2-HL0-35-N1 is an asynchronous model. It was Bosch Rexroth that manufactured the motor. This Bosch is capable of producing 200 Nm of torque. The value for speed is a thousand (1,000). A power rating of 20.9 kW should be provided. Kilowatts are the typically used unit of measurement for the power output and torque of a motor when it is operating at its rated speed and capacity. Additionally, it is recommended that the connection should get a direct current (DC) rated voltage of 24 ± 10%.
The continuous current is rated to be 43.5 amps. Acceleration of up to 461 Nm is the maximum. Typical examples of mechanical design limits include the selection of bearings or the incorporation of retaining brakes. At 20 degrees Celsius, the torque remains constant at 5.47. The typical configuration places a restriction on the velocity of 9000 revolutions per minute. Maximum speed is 4200 revolutions per minute when the connection is extended. The amount of time required to achieve a temperature that is greater than 63% of the rotor's ultimate temperature while it is under load, with rated torque for S1 operation, and surface ventilation from blower units that are directly attached. From -20 degrees Celsius to +80 degrees Celsius should be the temperature range for both storage and transit. Insulation is categorized as "F" according to DIN VDE 0530-1.
In the same way that other MAD motors can only be operated with blowers, the MAD160B-0100-SA-S2-HL0-35-N1 operates in the same manner. A cooling process is carried out by use of air currents that are directed through air plates and over the surface of the motor. An axial blower is utilized for the purpose of providing cooling.
Wake Industrial Warranty
