Product Description
The catalog ID for this asynchronous servo motor is MAD160B-0050-SA-S2-EG0-35-E1. Bosch Rexroth is the developer of it. The torque of the servo is 210 Nm. The speed that was calculated is 1000. The rated amps for this motor are 26.1. Lifting tools should be used safely. To ensure your safety when installing and configuring this servo motor, put on gloves, safety glasses, and shoes.
The standard maximum speed when employing a coupling attachment is 3000 nmax rpm. There is an additional holding brake for this asynchronous servo motor. 100 nM is the motor's transmittable torque. The connection voltage, which is direct current (DC), is 24 ± 10%. The current rating is 1.8 amps. The mass per unit area is 0.00065 kg/m^2. Retaining brake energy below 40,000 Ws is necessary for optimal operation. At 100 milliseconds, power disengagement is computed.
The power cable's minimum cross section measures 10 mm^2. There are a maximum of (02) two pole pairs supported. The moment of inertia of the rated rotor is 0.24 kg/m^2. IndraDyn's motor output shaft is shielded from liquid spray by one labyrinth seal. It can be added retroactively to motors that currently have the "shaft seal" option. When operating in challenging conditions, the IP65 standard for international protection might not be adequate. When motors are utilized in environments where oily lubricating coolants are used, there may be strict requirements placed on the tightness of the motor seals. The MAD motors are best suited for this field of application when sealed air is used. The air-pressure connector kit creates a predetermined excess pressure inside the engine that effectively stops some substances from penetrating, like coolant lubricants and leaking oil.
Wake Industrial Warranty
