MAD130D-0250-SA-S2-HG1-05-N1

Product Description

MAD130D-0250-SA-S2-HG1-05-N1 is a high-performance asynchronous servo motor. Salient motor features include support for digital servo feedback, an optional holding brake, fixed cooling fan, plain shaft, and standard bearing. The housing of the motor belongs to IP65 protection category. This rating signifies that the motor is fully dust proof. The motor is also safe from water directed at it from low-pressure jets. The motor can therefore be used in a range of environments. The shaft seal is another factor that provides protection for motor components against external contaminants. Encoder installed on the MAD130D-0250-SA-S2-HG1-05-N1 is a singleturn absolute encoder rated for 2048 increments. The encoder interface is EnDat 2.1. MAD motors are surface cooled motors with integrated axial or radial cooling fans. The MAD130D-0250-SA-S2-HG1-05-N1 motor features an axial cooling fan.

MAD130D-0250-SA-S2-HG1-05-N1 is also equipped with an 80 Nm holding brake. This brake operates according to the electrical release principle and requires a 24 Volts DC signal to initiate shaft release. Bosch has designed the motor for flange mounting. MAD series motors can be ordered with dual mounting options i.e. flange and foot mounting. In compliance with DIN EN 60034, the motor can handle vibration severity A. Standard bearings are used for motor manufacture. Electrical connection to the motor is made via turnable terminal box on side A of its housing. Rated torque for the motor is 120 Nm, the rated power is 31.4 kilowatts and the rated output current is 72 Amps. Nominal speed rating of the MAD130D-0250-SA-S2-HG1-05-N1 motor is 2500 RPM. Maximum speed rating for the MAD130D-0250-SA-S2-HG1-05-N1 motor is 7500 RPM. Average sound pressure produced by the servo motor during regular operation is 70 dB with 3 dB variance.