Product Description
The MAD130D-0250-SA-S2-BG0-35-N1 asynchronous housing motor by Bosch Rexroth has a three-phase design. This motor deploys surface ventilation cooling mode. The product and its fan have an IP 65 degree of protection. This device must be operated by people who are familiar with its intended use. The unit cannot be operated without the supporting drive controller and fan. It does not offer support for operation under water.
This motor cannot be installed in a vertical orientation. The product must encounter radial forces only perpendicular to the mounting surface with foot mounting. This device tends to have a reduced protection class if its accessories are retrofitted. The unit supports painting its housing only after checking the adhesiveness and resistance of the new paint. Its fan cleans the air from the surroundings. This motor is not meant to be put to operation in a heavily soiled atmosphere. The product has two temperature sensors in its windings for its protection. This device is associated with a pre-warning temperature of 110 degrees C. The unit uses a single-turn absolute encoder for feedback. Its fan and drive controller operate independently of each other.
This motor has a shaft-hub connection with very quiet running. The product features a radial shaft sealing ring made of PTFE. This device encompasses a deep-groove ball bearing. The unit must be carefully coordinated with the machine construction to make sure that the indicated load limits are not exceeded. It supports only a low axial force. This asynchronous housing motor must not be subject to impacts on the output shaft end.
Wake Industrial Warranty
