Product Description
The MAD130D-0250-SA-S2-AL0-35-N1 asynchronous housing motor from Bosch Rexroth must be worked on only after wearing suitable protective equipment when its surface is hot. This motor should not be disconnected or opened in the pressurized state. The product supports flange and foot mounting styles. This device has a maximum output power of 540 VDC. The unit encompasses an output shaft on its Side A. Its key speed is equal to the rated speed when there is no derating.
This motor has an overall length of 770 mm. The product should not be lifted by holding onto the output shaft or fan. This device features a frame size based on the mechanical dimensions of the flange. The unit uses a single-turn absolute encoder for feedback. Its output shaft is not surrounded by a shaft sealing ring. This motor incorporates fixed ball bearings on Side A. The product is balanced dynamically as per EN 60034-14 specifications. This device cannot be used in areas where there is a risk of explosion. The unit can be fitted with GTM planetary gearboxes on its plain output shaft. It comes with a rating plate attached to its housing.
This motor can be operated only with a drive controller with variable output frequency and voltage. The product is meant to be connected using only the manufacturer's cables. This device uses an INS380 connector with a maximum current carrying capacity of 100 A for its power connection. The unit must be shut down after switching off the protection switch for its fan. It should not be worked on in the running state. This asynchronous housing motor offers maintenance-free operation when it is operated within the specified operating conditions.
Wake Industrial Warranty
