MAD130D-0250-SA-S2-AG0-05-N1

Product Description

A single turn absolute encoder working on the EnDat2.1 framework and 2048 increments, with a supply voltage of 5 V. An axial fan blowing of 1000 m^3/h consuming 139-208 VA these are just some standout features of the MAD130D-0250-SA-S2-AG0-05-N1 honing from Bosch which give it an edge over its competitors. This highly configurable motor has a broad speed range of 2000 to 7500 rpm making it suitable for various applications. With some customizations in the design department these motors may even be used in dangerous areas under some conditions. The ATEX design makes this possible and underlines the conditions for the same. (These ATEX motors are NOT explosion protected devices).

These motors produce a rated power of 31.4 Kw with the maximum power being 64.4 Kw. The current at which this motor runs at is 72 A & the maximum current is 123.4 A. The mass of the motor is 165 kgs with a rotor inertia of 0.164 kgm^2 it also comes with 2 holding brake options; namely the electrically releasing and electrically clamping brakes.

The motor's user configurability is further enhanced by the various accessories offered like the labyrinth seal for better protection against fluids, sealing air connection for operating under adverse conditions and the various gearboxes offered. This motor has been tested in adverse conditions and is suited for all kinds of environments with a IP 65 rating and a insulation class 'F.' The motor has been tested to be operated in ambient conditions of 0-40 degree Celsius & up to 1000 meters above the sea level.