Product Description
The MAD130D-0200-SA-M2-AG0-05-A1 is a servo motor that operates in an asynchronous fashion. "Rexroth Bosch" is the name of the manufacturer. Use a power line with a diameter of 2.5 millimeters for this rotor. The moment of inertia for the rotor is 0.164 kg/m2. For the standard, the native bearing reached 7500 nmax rpm, while for the high-speed, it reached 10000 rpm, and for the coupling, it reached 5250 rpm. The duration of the thermal process is thirty minutes. The decibel level of the noise is 70.
For best performance, it is necessary to have a fan that is capable of conducting air currents from the air guide plates across the surface of the motor (also known as "surface ventilation"). Air stream that is "blowing" is depicted in the figure. Insulation is categorized as "F" according to the DIN VDE 0530-1 standard, which is widely used. Includes the International Protection Classification of IP65.
The constant torque at 20 degrees Celsius is 2.62 Nm/A. The minimum cross section of a power wire is sixteen millimeters squared. There are three pole pairs in all. The moment of inertia about the rotor is 0.164 kgm2. The weight of the motor is 164 kg. There is a rating of 1500 for the derating speed. At 20 degrees Celsius, the torque constant is 2.62. On the MAD model, the air is cooled by a fan unit that is firmly attached to the motor. This fan unit compels the surrounding air to move across the surface of the motor. The programming of each and every drive controller is required prior to the motor being started up. This is done in order to enable the motor to carry out the particular functions that are required by an application.
Wake Industrial Warranty
