Product Description
The MAD130D-0150-SA-S2-FG0-05-N3 asynchronous housing motor supplied by Bosch Rexroth uses hexagon or pan head screws and washers that adhere to DIN ISO specifications for attachment to the machine. This motor must be used only in industrial machinery. The product is designed for flange mounting and features mounting holes of a diameter of 18 mm. This device uses air baffles to guide the air currents across its surface. The unit can be repainted only after covering its open plug connectors, type plates, and safety labels for protection against paint. It must be ensured that dirt and fluids do not enter the interior of the motor with IM V3 mounting.This motor has no support for foot mounting. The product has an IP 65 protection rating for its output shaft and fan motor according to IEC 60529 specifications.
This device supports up to 10 m/s2 axial vibration load between 10 Hz and 2000 Hz frequency. The unit has an absolute air humidity ranging between 1 g/m3 and 29 g/m3 when it is in use. Its protective sleeves and covers must be removed only just before the assembly is started. This motor is CE Certified. The device may encounter premature bearing failure because of mechanical damage or increased wear. The unit does not support direct attachment of bevel gear bearings on the shaft. It tends to get damaged if its output shaft encounters impactsThis motor can withstand an axial force of up to 50 N. The product has a low-noise running action because of its standard bearings. This device must be installed horizontally and operated at at least 200 rpm speed for the labyrinth seal to function properly. The unit supports the rotation of the flange of the labyrinth seal in increments of 30 degrees . It can be fitted with clamping elements on the shaft for coupling the machine elements that must be driven.
Wake Industrial Warranty
