Product Description

The MAD130D-0150-SA-M2-BQ0-05-N1 is an AC-operated servo motor that can produce a torque of 3.09 Nm for an ampere of current that it consumes while operating. The nominal rotational torque this motor has to offer is approximately 155 Nm while rotating at a nominal speed of 1500 rpm. This motor is not only designed for low-torque applications but can also be used in heavy-duty applications since it can offer a maximum torque of 375 Nm when operating at a speed of 7500 rpm, which is great for heavy robotics applications where rotating heavy loads requires high rotational torque, which this motor can definitely offer.

To ensure the motor shaft rotates in the direction and position of interest, the MAD130D-0150-SA-M2-BQ0-05-N1 comes with a multiturn absolute encoder attached to the rear end of the motor. This encoder is capable of not only counting the steps but also counting multiple turns that this motor can perform. The number of steps per revolution allowed by this motor encoder is 2048 steps, which means for every step this motor rotates 0.175 degrees, perfect for precision-critical applications such as robotics.

With the inclusion of an Axial blower, the MAD130D-0150-SA-M2-BQ0-05-N1 servo motor remains cool during high-speed operations for a longer period of time as this blower helps regulate air within the motor enclosure, allowing the ambient air to move from the back to the front of the motor, removing heat dissipated by the motor coil. It takes approximately 55 minutes for this motor to cool down to 63% of its steady-state temperature, helping the motor run smoothly for a longer period of time without overheating or damaging itself. The nominal operational temperature range for this servo motor is between 0 to 45 degrees Celsius.