Product Description
The MAD130D-0150-SA-M2-AH1-35-N1 is a MAD series motor created by Rexroth with surface ventilation by a solidly connected fan unit. They are widely used as machine tools, printing, foodstuff, and metal-forming machine tools. The mounting style of this variant is flange and foot type. There are two main operations in an asynchronous motor, one is continuous and the other one is periodic. The motor protection class is International Protection 65 which indicates a high degree of protection against dust, oil, and liquids.
The MAD130D-0150-SA-M2-AH1-35-N1 has the air current of blowing from B to A. It consumes 139 to 208 VA depending on the supply voltage. It has a plain shaft with no sealing rings and comes with universal bearings. It is recommended that during operation, both radial and axial forces act upon the motor drive shaft and thus upon the bearings. If IndraDyn motors areoperated within the limits specified for radial and axial loads, the mechanical service life of the bearings is 30,000 operating hours.
The MAD130D-0150-SA-M2-AH1-35-N1 has 3 numbers of pole pairs, and the ambient temperature must be in range of 0 C to 45 C during operations. The mass of the machine without the encoder weight and holding brake is 165 kg. The weight of the holding brake is 8 kg. So the machine weight is 173 kg including holding brake weight. The holding brake type is electrically released with a transmittable torque of 80 Nm. The disconnection time of the holding brake is 140 ms, whereas the connection time of the holding brake is 50 ms. The maximum speed brake of this motor is 8000 rpm, and the connection voltage of the holding brake is 24 V DC.
Wake Industrial Warranty
