Product Description
MAD130C-0250-SA-S2-AP1-05-N1 falls under the category of asynchronous motors of Rexroth Bosch Group. This asynchronous or induction motor has a variety of applications in consumer appliances, material handling, etc.
The winding of this motor is 0250 and the connector to establish the electrical connection is present on the A side of the motor. The encoder of MAD130C provides unique positioning within a single revolution with 2048 increments using the EnDat2.1 communication protocol. The shaft comes with a sealing ring and is balanced with the entire key. The holding brakes are present and the maximum twisting force the brake can exert to hold the shaft stationary is 80 Nm. To disengage the brake and allow the shaft to rotate, electrical power is needed. When power is applied, the brake releases its clamping force. The rated current value for electrically releasing the brakes is 1.6 A and the moment of inertia is 0.002 kgm2. The disconnection time is 140 ms and the connection time is 50 ms. The maximum permissible braking energy is 30000 Ws and the maximum speed brake is 8000 revolutions per minute.
The rated torque of MAD130C is 100 Nm but the maximum torque value can reach up to 250 Nm. The rated power consumption is 26.2 kW and the duty cycle time is 10 minutes. The rated current consumption is 62 A but it can be increased up to the maximum current consumption of 114.9 A. The key speed of this motor is 2000 revolutions per minute but the rated speed is 2500 revolutions per minute. IP65 motor class protection ensures that the motor can endure dust particles and low-pressure water jet sprays.
Wake Industrial Warranty
