Product Description
Rexroth Indramat Bosch produces the MAD130C-0250-SA-S2-AG1-05-N1 type of servo motor. It is asynchronous by nature. The brake comes with a peak speed of 8000 units. The brake has a weight of 8 kilograms. For the axial blower, the calculated voltage for the connection would be 3 × 400 volts with a standard deviation of 15% either way and a frequency rating of 50/60 Hz. Furthermore, there is an alternative voltage option of 3 x 480V ± 10%, as well as a frequency of 50/60 Hz. The power consumption ranges from 139 to 208 VA. The blower is capable of generating a current of 0.20-0.25 amperes. The air flow rate is 1000 cubic meters per hour on average.
The torque measurement is 100 Nm. The velocity was rated at 22,500 units per hour. The rated power is 26.2 kw. The current rating is 67.0 amperes (A). The torque produced when the rotor isn't in motion is 110 Nm. The derating velocity is 2000 rpm. The current while the system is not in motion, which is also referred to as the steady state, is 67.5 amperes. The highest possible speed is 241 nautical miles per hour. The torque consistent at a temperature of 20°C is 2.1. The number of supported pole pairs is three (03), and the minimum cross-section of the power line is 16 mm2.
The max speed with bearing is as follows: standard is 7500 nmax rpm, coupling attachment is 5250 nmax rpm, reinforcement is 7500 nmax rpm, and high-speed is 10,000. The thermal time value is 50 minutes. The noise grade is 70 decibels, with an assessed increase of three decibels in adverse situations. The acceptable span for the optimal temperature spans from 0 to 40 °C. The acceptable range for storage and shipment temperatures is -20 to +80 °C. DIN VDE 0530-1 classifies the insulation grade as "F".
Wake Industrial Warranty
