Product Description
The MAD130C-0200-SA-C0-AH0-05-N1 motor comes with a rated speed of 2000 rpm as well as a rated torque of 110 Nm, making it suitable for high-performance industrial applications. It has a maximum current of 57.0 A and an estimated power consumption of 23.0 kW. The motor derates at 1500 rpm and has a constant torque of 115 Nm and continuous current of 59.6 A at stationary. At 20 C, it has a torque consistent of 2.64 Nm/A and an ultimate torque of 253 Nm. This motor's three pole pairs enable fine dynamic speed and performance control, which makes it suitable for a variety of industrial uses.
Different kinds of encoders for position detection and evaluation are available for this model. These include an absolute encoder, incremental encoders with shock-damped installation for presses and stamping machines, and conventional incremental encoders for manufacturing machinery with lower current shock loads. These extremely resistant to environmental conditions encoders were developed especially for INDRAMAT motors and guarantee reliable performance in an array of applications.
The rotor output shafts with keyways and installed incremental encoders determine the encoder's reference point to a precise angular spot. This arrangement minimizes the possibility of undetected dimensional displacements through allowing drive replacement without requiring adjustment work. Extensive reference processes are not required since the absolute encoder generates a unique position value for each position change that remains intact even in the event of an emergency shutdown or power failure. Using gray code, the encoder offers a high resolution of 24 bits with 4096 resolutions and 4096 increments per 360. The motor works well for applications needing accurate and dependable positioning feedback due to its high accuracy.
Wake Industrial Warranty
