Product Description
The MAD130C-0150-SA-S2-LH0-35-N1 is part of the MAD series Asynchronous AC motor that features a cooling fan attached to its rear. This cooling fan requires 3 phase 400 volts AC to operate and can be removed for maintenance purposes however it is not recommended to operate the motor without the fan as it may overheat or even burn out in severe operating conditions. The motor should always be operated below 40 degrees Celsius to help run it smoothly without any heating issues.
This AC motor is primarily designed to be used as a servo motor in industrial applications such as robotics. It has a torque rating of 117 Nm is plenty for heavy-duty applications as the motor can easily rotate in heavy load conditions without any major hiccup. Since the motor can provide high torque it needs to be operated with a voltage rating between 480 Volts to 690 Volts AC, drawing a current of 48.9 Amperes which is very dangerous and should always be handled and operated by a professional with proper safety gear.
The MAD130C-0150-SA-S2-LH0-35-N1 has a 3-pole design which is 3 coils inside the motor that can be excited at different frequencies, for speed control and regulation. The motor has a rated speed of 1500 rotations per minute under normal conditions and can reach a maximum speed of 7500 rotations per minute when used with standard bearings. The derating speed of this motor is 1000 rotations per minute which is the reduced speed of the motor due to sudden changes in operating conditions. This motor has a foot mounting for attaching it to a stable base as well as it can be connected to a flange mount.
Wake Industrial Warranty
