Product Description
The Bosch Rexroth MAD130C-0150-SA-S2-AQ0-35-N3 asynchronous housing motor has four mounting holes and two foot plates for foot mounting. This motor is intended to be assembled only after checking its components for damage. The product should not be operated without a grounding connection. This device-related electrical connection must be established only after its proper mechanical assembly. The unit encounters axial and radial forces when it is in use. Its transmission elements must be fitted and pulled off using suitable equipment that has to be heated if needed. This motor can be installed horizontally and vertically.The product is prone to damage because of strikes on its output shaft. This device must be connected using the manufacturer's readymade cables. The unit has an isolation system with a high dielectric load in converter mode. Its fan must be activated and checked for proper functioning before it is operated. This motor must be deactivated in case there is a malfunction. The product is supposed to be secured against movement or dropping before it is disassembled. This device must not be worked on when its surface is hot. The unit may need a dismounting of the fan to be done for troubleshooting or maintenance measures. It may restart automatically after a power failure when a voltage is applied.This motor must have a surface temperature of less than 40 degrees C before it is restarted. The product features two temperature sensors in its winding. This device tends to have an excessively high housing temperature if its original parameters have been changed. The unit has no negative impact on the environment with its operation. It is likely to depict vibrations if its bearings wear out. This asynchronous housing motor has derated output when it is used outside the specified operating range.
Wake Industrial Warranty
