Product Description

Power and durability. These are the qualities that set MAD motors apart from other AC motors on the market. MAD motors may come in different frames and sizes, with each combination having distinct qualities and capabilities. In terms of the frame type, MAD motors may have a frame type of 100, 130, 160, 180, or 225. Larger frame numbers indicate heavier construction and higher torque output. Meanwhile, for each frame type, motors may have a frame size of B, C, or D. Out of these frame sizes, size B motors are the smallest, while size D motors are the largest. Out of these combinations, one specific motor model by Rexroth under the MAD family series is the MAD130C-0150-SA-C0-AH1-35-N1.

The MAD130C-0150-SA-C0-AH1-35-N1 has a frame type of 130 and a size of C. Motors with the same specification code have a maximum length of 640 mm, exclusive of the holding brake. During normal operation, the motor can reach a rated speed of 1500 revolutions per minute, which is equivalent to an angular speed of 157 rad/s. The nominal angular speed may then be used to compute other quantities, like the linear velocity, for certain applications. At rated speed, the motor supplies 18.4 kW (power), 117 Nm (torque), and 48.9 A (current). In some cases, motors are operated to meet certain demands. These demands might require higher power, higher torque, or higher current. The maximum power listed on the datasheet is 37.72 kW. Assuming a constant voltage, the maximum power yields a maximum current of 93.3 A. Finally, the maximum torque achievable by this motor model is 275.2 Nm.

The MAD130C-0150-SA-C0-AH1-35-N1 also has a brake for stalling motor operation and a shaft type of H.