Product Description
The MAD130C-0100-SA-S2-BP0-05-N1 asynchronous housing motor produced by Bosch Rexroth must be stored and transported only in the horizontal orientation. This motor and its fan have an IP 65 protection rating. The product portrays an optimized construction. This device is compatible with a drive controller of the IndraDrive product range. The unit delivers maintenance-free operation if it is used as specified. It should be used in its original state without any structural changes. This motor must neither be installed nor operated in the damaged or defective state.The product can be installed in forming, paper converting, packaging, printing, and food machines. This device may need the connection of additional sensors and actuators to control and monitor it.
The unit installation must be done in accordance with the regulations mentioned in its documentation. It does not support operations under water. This motor must be free of liquid accumulation around the output shaft when it is installed vertically with the shaft pointing upwards. The product depicts derated output when the operating conditions are exceeded. This device must not be operated when the extreme maximum temperature is very high or there is extreme temperature fluctuation. The unit features faulty control because of issues like operator, firmware, or software errors. It has no holding brake.This motor has a maximum output power of 540 VDC. The product has two KTY84-temperature sensors permanently installed in its windings. This device related fan and drive controller function independent of each other. The unit encounters a temperature change rate of 0.5 degrees C/min. Its fan connection to the associated supply network is done through a motor protective switch and a cable. This asynchronous housing motor has an IP 65 protection rating for the output shaft.
Wake Industrial Warranty
