Product Description
The MAD130C-0100-SA-S2-AP0-05-N1 asynchronous housing motor provided by Bosch Rexroth comes with a shaft sealing ring. This motor features a flange mounting style. The product is balanced with a full key. This device is cooled by guided air currents. The unit is connected only with one temperature sensor at a time for protection against overload. It depends on an absolute encoder for feedback.
This motor has an IP 65 protection rating on the flange side. The product has a standard deep-groove ball bearing that absorbs low and medium axial loads. This device portrays continuous operation with S1 operating mode. The unit has a maximum torque based on the drive controller used. Its shaft sealing ring is resistant to oils and chemicals. This motor has a key speed that is equal to the rated speed when there is no derating behavior. The product may need its fan to be dismounted for maintenance purposes. This device restarts automatically after a power failure when voltage is applied. The unit and its fan must be worked on only by skilled personnel. Its electrical and mechanical connections must be checked after every 1,000 hours of operation.
This motor must be disconnected from the power supply if it is kept unused for a long time. The product can be identified by the type plate on its housing. This device may cause personnel injury if contact is made with the fan impeller. The unit must be allowed to cool down after its operation before doing any work on it. Its permanent magnets produce strong magnetic and electromagnetic fields when in use. This asynchronous housing motor must be handled using suitable equipment.
Wake Industrial Warranty
