Product Description
The MAD130C-0100-SA-S2-AK0-35-N1 asynchronous housing motor delivered by Bosch Rexroth has an optimized construction. This motor and its fan have an IP 65 protection rating. The product along with the drive controller offers a drive solution with open functionality and high performance. This device should be used only after reading and understanding its documentation. The unit must be used in its original state without any structural or hardware changes. Its installation is to be done in compliance with the regulations mentioned in its documentation. This motor must not be operated when there is an extreme fluctuation.The product must neither be installed nor operated in the damaged or defective state. This device must be assembled, mounted, and installed as stated in its manual for safe operation. The unit should not be operated even for a brief period without the grounding connection. It tends to portray faulty control because of a malfunctioning sensor or encoder. This motor features a cooling time of up to 140 minutes. The product can be safely operated up to the maximum speed set by the manufacturer. This device must be transported and stored only in the horizontal orientation. The unit delivers maintenance-free operation when it is used under the indicated operating conditions. Its fan and air circulation must be inspected for proper functioning at least once every 1,000 operating hours.This motor comes with protective sleeves on its plug-in connectors and output shaft. The product should be subject to repeated high-voltage inspection tests. This device can be identified by its type designation mentioned on the nameplate on its housing. The unit must be lifted and installed in the machine using the lifting eyebolts on its housing. It should be stored in a place away from direct solar radiation. This asynchronous housing motor must be checked for corrosion-free electric contacts after a storage period of one to five years.
Wake Industrial Warranty
