Product Description
The MAD130C-0050-SA-S2-KG0-35-N3 is a type of induction motor that was launched in the market by Indramat Rexroth. It is an AC motor, and in a broader context, there are only two types of AC motors. One is an induction motor and the other one is a synchronous motor. The distinguishable part between both is the slip and the difference between the rotor and stator speed. This variant has a rated speed and key speed of 500 rpm, and with universal beatings installed, the maximum achievable speed is 7500 rpm. The continuous torque at the standstill of this variant is 140 Nm with the continuous current at the standstill of 19.7 A.
Out of 7 insulation classes, this motor MAD130C-0050-SA-S2-KG0-35-N3 has F class insulation. The least recommended value by Indramat Rexroth for the thermal stability of the wire is 80 degrees C or 176 degrees F to operate the motor. The housing painting of the motors consists of a jet black. The code is RAL9005 which represents 2K epoxy resin coating. This coating is based on epoxy polyamide resin in water. Indramat Rexroth permits 0 degrees C as the lowest air temperature for the motor. The motor protection class is IP 65, and the duty cycle time is 10 minutes along with the thermal time constant of 50 minutes.
The MAD130C-0050-SA-S2-KG0-35-N3 has no holding brakes and comes with an axial fan to blow out the excessive heat within the motor. The overall weight and moment of inertia of this machine are 122 kg, and 0.108 kgm2 respectively. This motor is in high demand due to its simplicity, robustness, and efficiency. The motor is equipped with an S2 single-turn encoder for feedback and control. The supply voltage of the motor encoder is 11 V with the triggering signal of 1 Vss, and the total number of increments offered is 2048.
Wake Industrial Warranty
