Product Description
The MAD130B-0250-SA-S2-AH0-05-H1 is an IndraDyn A motors variant created by Rexroth that is well known for its high continuous ratings and compact dimensions. With the controller integration, these motors offer intelligent drive solutions with high power density and open functionality. This asynchronous motor is capable of providing rated 2500 rpm and with high-speed bearings, this machine can generate maximum speed up to 10,000 rpm. The key speed of the motor is 2000 rpm, which means the derating speed is 500 rpm. If there is no derating behavior, the key speed is equal to the rated speed. It has the flange type mounting with no holding brakes.
The MAD130B-0250-SA-S2-AH0-05-H1 has a plain shaft with no sealing rings. The electrical power is connected at side A, and it comes with a single-turn encoder with 2048 increments. To cater to the problems of heating within the asynchronous motor, axial fans are used as a cooling method. The rated torque of the machine is 75 Nm whereas the maximum torque is 176.5 Nm. The continuous torque at a standstill of this asynchronous motor is 80 Nm, and the continuous current at a standstill is 47.3 A.
The MAD130B-0250-SA-S2-AH0-05-H1 has constant torque at 20 C of 2.15 Nm/A. The manufacturing tolerance is 5 % in the thermal time constant. The cycle duration is 10 minutes as per the duration of the cycle in S6 mode at 44 percent. The number of pole pairs of the motor is three and in total, the individual pole value is six. All IndraDyn A motors are delivered after the high-voltage test according to EN 60034-1, insulation resistance test according to EN 60204-1/1.92, protective conductor connection test according to EN 60204-1/1.92, concentricity and position tolerances of shaft end and mounting flange test according to DIN 42955, and vibration measurement according to DIN 2373.
Wake Industrial Warranty
