Product Description
The MAD130B-0250-SA-S2-AG1-05-N1 Bosch Rexroth asynchronous housing motor works in unison with an IndraDrive drive controller from the same manufacturer. This motor belongs to the MAD series of such motors. The product should be operated only as intended to avoid unfavorable consequences. This device encompasses a holding brake to support its operation. The unit may need additional sensors and actuators for controlling and monitoring it. Its drive controller must be programmed before the commissioning process for the motor to perform the application-specific process. This motor must not be picked up by holding onto the output shaft or fan.The product must be handled by only qualified and trained personnel. This device has a high electrical voltage because of an incorrect connection.
The unit causes a risk of burns if its hot surface is touched without wearing protective gloves. Its faulty control can result in dangerous drive controller movements. This motor depends on the connected drive controller to control its holding brake. The product has a surface temperature of more than 60 degrees C during and immediately after its use. This device should be handled and mounted using suitable equipment for mounting and transport. The unit should not be disconnected or opened in the energized state. It should not be used in potentially explosive areas.This motor has a nameplate attached to its housing. The product is CE Certified and cUL Recognized. This device is tested for insulation resistance and equipment grounding connection. The unit may cause property damage or personnel injury because of improper handling. It should be used only with lifting equipment that can withstand its weight. This asynchronous housing motor must not have salt mist on its surface.
Wake Industrial Warranty
