Product Description
Rexroth Bosch manufactures the servo motor MAD130B-0250-SA-C0-BH0-05-N1. Because of the capacitance of the motor's power connections to the housing, the servo motor has a 17.4 nF discharge capacity. This aids in guarding against electrical damage to the device. The number of magnetic poles in the motor is three, and it also contains three pole pairs. Both the torque and speed of the motor are impacted. The cross-sectional area of the wires that provide electricity to the motor is 10.0 mm2, which is known as the power wire. In order to choose the right wire size for the motor, this is essential.
The weight of the servo motor, expressed in mass kg, is 105.2 kg. Finding the right mounting and support for the motor depends on this. A measurement of how challenging it is to alter the motor's rotating speed is the rotor moment of inertia, which is 0.0840000 kgm2. Applications that need abrupt speed changes should take note of this. The motor's highest capable current for brief intervals of time is 83.3 A (effective value). Furthermore, 80.0 Nm is the continuous torque at standstill the highest torque the motor can continually generate while it is not spinning.
47.2 A is the highest continuous current that the motor may draw while it is not spinning, and this is the current at a standstill. With a rated speed of 2,500 1/min, the servo motor can run constantly at its intended speed. Since the torque of the motor starts to diminish at this speed, 2,000 1/min is the key speed. That is the maximum speed at which the motor may be run safely, which is 7,500 1/min (with bearing N). The motor's maximum torque of 176.5 Nm is its whole torque capacity. The highest power that the motor is capable of producing is 40.18 kW. Wake Industrial provides a one-year warranty.
Wake Industrial Warranty
