Product Description
The MAD130B-0200-SA-M2-AP1-05-N1 asynchronous housing motor produced by Bosch Rexroth can be installed vertically with the output shaft pointing downward or upward. This motor must not be worked on when its surface is hot. The product may cause personnel injury or property damage if it is not used as intended. This device is equipped with an electrically-releasing holding brake. The unit houses a multi-turn absolute encoder for feedback. Its fan housing has several screwed elements.
This motor features an installation altitude of 0 m to 1000 m above sea level. This product must be operated such that the application does not go beyond the reduced motor data. The device supports a maximum radial shock load of 150 m/s^2 for six seconds. Its housing has an excessively high temperature if its fan is not working or its original parameters have been changed. This motor uses the holding brake to hold its axes in place. The product does not ensure personnel safety with the holding brake. This device comprises an incoming switching voltage depending on the line length and cable properties. The unit must be used in the original state without structural changes. Its temperature sensor has a resistance of 577 Ohms at 25 degrees C.
This motor must be free of dirt, dust, and fluid accumulation around its output shaft with an IM V3 mounting style. The product housing should be painted only after covering its rating plate, safety labels, and open connectors. This device has an IP 24 protection class for its fan grille. The unit uses an axial fan for the cooling action. Its protective sleeves must be removed only just before its assembly. This asynchronous housing motor depends on the drive controller for controlling the holding brake.
Wake Industrial Warranty
