Product Description
The MAD130B-0150-SA-S2-TH0-35-H1 Bosch Rexroth engineered asynchronous housing motor always works in unison with a compatible drive controller from the same manufacturer. This motor supports only horizontal installation or mounting position. The product has DS threaded centering holes on its output shaft according to DIN 332 specifications. This device has no shaft sealing ring around the output shaft. The unit belongs to the MAD range of motors from the manufacturer. It has an IP 54 protection class with horizontal installation.
This motor should not be operated without its fixed fan. The product has a hot surface during the operation phase. This device may encounter short-term damage because of forces due to incorrect installation with foot mounting. The unit has a housing coat that is partially resistant to hydraulic oil and organic solvents. It comes with protective covers and sleeves on its output shaft and covers. This motor must not be operated in heavily soiled areas. The product is balanced dynamically in accordance with EN 60034-14 specifications. This device has an IP 65 degree of protection for its fan. The unit has a nameplate attachment on its housing. It is cUL Recognized and CE Certified.
This motor is tested for position and concentricity tolerances of its mounting flange and output shaft as per DIN 42955 specifications. The product must be put to use only after reading and understanding its associated documentation. This device should be free of salt mist and condensation on its surface. The unit comes fitted with lifting eyebolts that must be used for its pickup. It portrays a 3K4 operating class. This asynchronous housing motor can withstand a maximum axial shock load of 10 m/s^2 for 6 ms.
Wake Industrial Warranty
