Product Description
The MAD130B-0150-SA-S2-BQ1-35-V1 asynchronous housing motor from Bosch Rexroth encompasses a squirrel-cage rotor. This motor is recognized for its compact dimensions. The product is designed exclusively for industrial use. This device offers assurance of operational safety if it is used as intended. The unit is cooled by means of a fan. It is an integral part of the manufacturer's drive system. This motor is always used along with a drive controller. The product is one of the various such motors in the MAD series. This device must at no time be operated without a proper earth connection. The unit incorporates permanent magnets in its construction. Its surface tends to become very hot during the operation period. This motor is meant to be operated within the ambient conditions specified by the manufacturer.
The product features a maximum torque based on the connected drive controller. This device cannot be used in potentially explosive areas. The unit has two permanently installed KTY84-130 temperature sensors in its windings. It can be mounted only horizontally.This motor supports flange and foot mounting styles. The product is coated with a black RAL9005 paint on the housing. This device is cooled through air currents guided across the motor surface by air baffles. The unit has a diameter of 100 mm for the air tube. Its fan has a reduced flow rate because of dirt and contaminants. This motor has a holding brake that works on the electrically-releasing principle. The product features an incoming switching voltage. This device does not assure personnel safety with the holding brake. The unit uses a single-turn absolute encoder for feedback. Its encoder connection position cannot be changed. This asynchronous housing motor has a shut-off temperature of 120 degrees C.
Wake Industrial Warranty
