Product Description
As the asynchronous aka induction motors are a necessity of industrial settings, Rexroth Bosch Group manufactures the best-of-its-kind motors that are further distributed by Wake Industrials as we are their established suppliers. MAD130B-0150-SA-S0-FQ0-05-N1 is one of their asynchronous motor with 150 windings, B length, and 130 sizing. It belongs to the IP65 category of motor protection class that guarantees the ability of the motor to combat low-pressure water jet sprays and dust particles. Additionally, the insulations of the motor fall in the F category which means that the insulations can withstand higher temperatures of up to 155 degrees C. However, if you want to keep the motor functioning for a longer period, avoid operating in spaces where ambient temperature is below 0 degrees C and more than 40 degrees C. The cooling system is also present in the motor which is equipped with axial fans that consume power somewhere between 139 VA to 238 VA and the fan flow value lies between 0.20 V to 0.25 V.
The maximum mechanical output torque MAD130B-0150-SA-S0-FQ0-05-N1 can produce without overheating or damaging its components is 85 Nm and 200 Nm is the absolute maximum torque this motor can deliver. 13.3 kW is the maximum electrical power input that a motor can handle without overheating or damaging its components but similar to the torque it can also increased up to the maximum power output of 27.4 kW. The rated speed of the motor is 1500 rpm and the key speed is 1000 rpm but thanks to standard bearings that helps in achieving higher speeds of up to 6000 rpm. However, whether it is current, torque, power, or speed, it is not recommended to operate at its maximum value as it poses a significant negative impact on the life and functioning of the motor.
Wake Industrial Warranty
