Product Description
The MAD130B-0150-SA-S0-BL0-35-V1 asynchronous housing motor produced by Bosch Rexroth is fitted with reinforced ball bearings. This motor has two KTY84-130 type PTC temperature monitoring sensors that are installed permanently in its windings. The product features a frame size based on the mechanical dimensions of the mounting flange. This device is always meant to be operated with a fan. The unit deploys a blowing-type air current for its cooling. Its electrical connector is directed to side B. This motor is balanced dynamically according to EN 60034-14 specifications.The product comes with an IP 65 degree of protection. This device comprises an INS0380 flange socket. The unit can be operated with sealing air only if its output shaft is equipped with a shaft sealing ring.
It supports only low axial shaft loads when gearboxes are attached. This motor must not be connected directly to a single-phase or three-phase mains supply. The product needs two power cables for its connection if it is not possible to use a single cable due to the large bending radius.This device comprises a keyway shaft that is balanced with a half key. The unit comes with a connector for connecting its fan. It is designed for operation at an ambient temperature ranging from 0 degrees C to 40 degrees C. This motor may encounter sinusoidal oscillations in stationary use. The product can be installed vertically with the output shaft directed downwards or upwards. This device has a RAL9005 coat on the housing that is resistant to diluted acids/lyes. The unit associated fan must not be used if the surrounding air contains abrasive particles. It cannot be used in potentially explosive areas.
Wake Industrial Warranty
