Product Description
The MAD130B-0150-SA-M2-BH0-05-N1 asynchronous housing motor manufactured by Bosch Rexroth must be operated only after ensuring that its components are free of damage. This motor should not be subject to strikes on the output shaft. The device must not be lifted by holding onto the blower or output shaft. This unit is supposed to be connected to the machine by observing the specified tightening torques. It can be fitted with transmission elements on the shaft by using the centering hole.This motor uses M16 screws with 18 mm diameter for mounting the flange. The product must be transported by using appropriate equipment. This device should be stored in a place away from direct solar radiation. The unit comes with protective covers and sleeves on its connectors and output shaft. Its surface must be free of salt mist all the time.
This product features a 1K21 storage class according to DIN EN 60721-3-1 specifications. The device is meant to be transported at a temperature ranging between -20 degrees C and 80 degrees C. This motor comes fitted with lifting bolts that adhere to DIN 580 specifications. The unit must not be under mechanical load during the transportation and storage phases. It tends to encounter damage of its components if it is subject to improperly executed high-voltage tests. The product meets UKCA requirements and is CE Certified. This device depicts a vibration speed of 0.71 mm/s. The unit must not be fitted with skew bevel driving pinions on the output shaft. It supports a circumferential radial force of 40 N. This asynchronous housing motor can be installed horizontally and vertically.
Wake Industrial Warranty
