Product Description
The type MAD130B-0150-SA-C0-LF0-35-N4 is an asynchronous housing motor. It has a rated torque of 85 Nm and a rated power of 13.3 kW. The mass of the machine is 100 kg without the weight of the holding brake. The continuous torque at standstill is 95 Nm, and the continuous current at standstill is 37.4 A. The torque constant is 3.08 Nm/A at 20 C. The discharge capacity of the motor is 15.8 nF and the motor class protection is IP 65. The maximum speed break of electrically clamping and releasing of variant MAD 130B-0150 is 8,000 rpm. However, the connection time of electrically clamping and releasing is 110 ms and 50 ms respectively.
It has an incremental encoder having 2048 periods, and 1 Vss signal. The supply voltage is 5v for the encoder. The frame length of this motor is B, and the type of cooling is through blowing. The connector for the electrical connection is on the left for the MAD130B-0150-SA-C0-LF0-35-N4, and the terminal box connection is A side. The bearing type installed in the motor is standard. The rated speed of this motor is 1500 rpm.
The thermal time constant is 45 minutes and the number of pole pairs is 3. The power wire cross-section area is 6 mm2. The moment of inertia of the motor holding the brake of variant MAD 130B-0150 is 0.002 kgm2. The maximum permissible braking energy is 3 x 104 Ws, and the mass of the holding brake is 8 kg. So, the total mass of the machine is 108 kg. The sound pressure level at 1 m distance, with pulse width modulation of 4 kHz is 70 dB. The admissible temperature range of the machine to run is from 0 C to 40 C. This variant of motor comes without holding brake.
Wake Industrial Warranty
